The Oculus Quest 2 has a rechargeable battery in its headset that might begin wearing out over time. You may find that you need to charge it more frequently and can’t use the headset for long. Alternatively, the controllers might stop working altogether, which is usually due to drained batteries, which don’t come with built-in chargers.
Whichever of these problems has happened to you, it’s time to consider replacing the batteries. Here, we’ll address the issue of replacing your Quest 2 headset and controller batteries, getting you back to optimal performance. Let’s get started.
Changing the Batteries
The Quest 2 is powered by a built-in rechargeable lithium-ion battery. This battery pack is charged using a USB-C cable like other modern tech. However, the controllers aren’t equipped with the same integrated battery. They have a single AA battery, which should run for a decent amount of time before needing to be replaced or recharged separately. Here’s what you need to know about replacing these sets of batteries.
Changing the Headset Batteries
Devices with rechargeable batteries are prone to having power issues. For example, the batteries may get weaker over time, which means they’ll have to be recharged more frequently. This can be frustrating when gaming because you won’t be able to use them continuously for a long session. When this happens, you might consider replacing the rechargeable battery pack.
Changing the Oculus Quest 2 headset batteries may not be a straightforward task, especially if you don’t have a lot of knowledge about electronics. Changing these batteries yourself could also void your warranty and put you at risk of injury. You don’t want to put on a VR headset with a faulty power source.
It’s advisable to have the batteries replaced by the manufacturer, especially if the device is still under warranty. Get in touch with Oculus through their support page and submit a ticket requesting a battery change. They will get back to you within two days with information on how to proceed.
Fortunately, the Oculus Quest in-built battery pack is designed for heavy usage. It should last you a long time before there’s a need to replace it.
Changing the Controller Batteries
Unfortunately, the Quest 2 controllers don’t have in-built batteries. Instead, they each have a single AA battery that can’t be charged using the USB cable. These batteries will have to be replaced or charged via battery chargers once they run out of juice.
The Oculus controllers have a battery compartment that many users find challenging to locate. It’s hidden away in the controller grip with a small eject icon giving away its location. Check out how to replace the Oculus Quest 2 controller batteries.
- Hold the controller with the eject icon pointing up.
- Apply a little pressure and slide the battery recess cover upwards.
- With the cover off, remove the battery and replace it with a new one.
- Slide the cover in place and repeat the above steps for the second controller.
If you have rechargeable AA batteries, you can put them in a compatible battery charger and have two sets of interchangeable batteries at all times to minimize downtime. This is an eco-friendlier option since decomposing batteries are extremely toxic to the environment. There is also a push towards recycling options, such as California’s ban on tossing alkaline batteries with other domestic waste.
How to Check Controller Battery Level
Oculus Quest 2 controllers have excellent battery life, but it doesn’t hurt to check the level every once in a while. This will prevent the disappointment of your controllers running out of juice during a gaming session. Let’s look at how to verify the battery level.
- Open the Oculus Quest 2 home screen.
- Navigate to the menu and locate the battery section.
- Check the battery levels of the headset and each controller.
The battery level section might not be accurate for degraded rechargeable batteries. If a recharged battery is reporting a relatively low charge, it might be time for a permanent replacement.
How to Charge the Controllers With Rechargeable Batteries
The Oculus Quest 2 controllers are powered by AA batteries, and there’s no way to change that. That means that you can’t recharge them using a USB cable like you would the headset.
However, you can use a charging dock to get the job done. Keep in mind that the batteries that come with the initial Oculus Quest 2 purchase are disposable. To use the charging dock, you need to invest in higher-grade rechargeable AA batteries compatible with the dock. You should research the dock you’re planning to buy to see which batteries to use.
Anker, an electronics company that specializes in batteries, has designed a charging dock you can use with your controllers. The Anker Quest 2 Charging Dock allows for the wireless charging of the headset and controllers. You won’t even have to remove the battery cover when juicing up the AA batteries.
BeswinVR is another company that offers charging solutions for Oculus Quest 2 controllers. It has a magnetic charging port that you can use to charge the batteries using a USB cable.
Give It Some Juice
The Oculus Quest 2 is a popular VR device that allows users to immerse themselves in an online universe. The headset and controllers come equipped with batteries designed for heavy usage. Nevertheless, they eventually get drained. Running out of battery power halfway through a gaming session can be particularly frustrating. Therefore, it’s essential to check the battery level regularly and learn how to replace them as well. This guide teaches you all you need to know about changing your Oculus Quest 2 batteries.
Have you changed your Oculus Quest 2 batteries? How did you go about it? Let us know in the comments below.
Disclaimer: Some pages on this site may include an affiliate link. This does not effect our editorial in any way.
